Instructions for Use of the 48 W UV Lamp

WARNING! Always check the condition of the device and its accessories before use!

Accessories:

• EU Standard Charger


• Warranty Certificate

Unpacking and Preparing the Device

1. Remove the device and its accessories from the box.


2. Select a stable and flat surface for placing the device.


3. Remove the cable tie and connect the device to the power adapter.

Modes of Use

The device has four buttons that perform different functions:

1. 
   

   Power On / Power Reduction Button:

   
   
   
   
   • Turns on the lamp.
   
   
   • If the button is held down, it reduces the power of the lamp for more sensitive clients.
   
   
   
   


2. 
   

   5 Second Curing Button:

   
   
   
   
   • Used for quick curing and fixing.
   
   
   
   


3. 
   

   30 Second Curing Button:

   
   
   
   
   • Medium curing time, suitable for most gel polishes and building gels.
   
   
   
   


4. 
   

   60 Second Curing Button:

   
   
   
   
   • Longer curing time, recommended for thicker layers of gels and some special materials.
   
   
   
   

Usage:

1. Connect the device to the power supply.


2. Select the desired curing time (5, 30, or 60 seconds) using the corresponding button, and the lamp will automatically turn on and start counting down.


3. After the set time has elapsed, the lamp will turn off automatically.


4. If the timer is off, the device will recognize when your hand is in the lamp and will turn on automatically.

Ending Usage:

1. Turn off the lamp using the power off button.


2. Unplug the power cable from the outlet.


3. WARNING! Avoid direct eye contact with the UV light source!

Cleaning/Maintenance/Care

1. The device must not be connected to the power supply.


2. Gently wipe the surface of the lamp with a slightly damp cloth.


3. Be careful not to let any liquid enter the device or get on the switches!

Storage

• Always keep the device and its accessories in a dry place, away from heat, in a clean state.

Safety Instructions

1. Use the device only indoors, at a temperature of 0-40°C.


2. Do not leave the powered-on device unattended.


3. Do not place the device on a surface from which it may fall.


4. No liquid should enter the interior of the device or get on the switches.


5. Repairs to the device may only be performed by authorized persons!


6. Do not look directly at the light source of the device and do not expose your skin to excessive UV radiation.


7. The electrical parts of the device are under voltage even when the device is turned off.


8. Always disconnect the device from the power supply after use.

For information about the device and warranty, please visit our website: www.nailgel.hu, or contact us by email at info@nailgel.hu.

Warranty Duration: 24 months